How to Use
When you receive your bracelet, remove the white receiver from bracelet
and charge with the charging wire in a USB outlet, your phone charger or
any other USB charger, for at least 2 hours.
Once charged, press the button on top of the white receiver (learning key)
briefly to see if the LED light comes on, if it does not then hold the button
on top of the white receiver down for about 10+ seconds or until it vibrates
The LED light should come on if you push the button on top of the white
receiver (learning key) briefly.
Now press the red button on the Transmitter(remote control) for 1 – 3 seconds
firmly, the white receiver should now vibrate.
If it does not then you may have to PAIR them.
Press and HOLD the red button on the transmitter(remote control) at same
time press the button on the white receiver (learning key) and release 3
times continuously, while still holding down red remote button, the LED
light should light and then go off each time.
Now press the red button on the Transmitter, white receiver should vibrate,
if not repeat above Pairing instructions.
To unpair push button on Receiver(learning key) 3 times then hold it down
on the 4th until it vibrates.
Turning Receiver OFF/ON
Press the button on the white receiver (learning key) and hold down for apx.
10+ seconds or until it vibrates, works both ways to turn ON or turn OFF.
White Receiver will vibrate every 20 seconds when battery is low to remind you.
The Battery in the Receiver should be recharged approximately every three
days if left on and used lightly.
If you use it heavily, you may need to recharge every 2 days.
If you turn it off for a long period of time, then you may want to to recharge
it before you use.[/vc_column_text][/vc_column][/vc_row]